Rotator Sales

Reconditioned CDE & HyGain Rotators

USAGE: For 3 to 7 element tri-band beams,
monoband stacks, or monster VHF/UHF arrays.

remember : "Heavy-Duty" is merely a relative term....

These come with 90 day warranty :

Ham "M" Heavy Duty Vert. Load: 800 lbs. 98 ball bearings Potentiometer feedback 8 wire hookup 24' Max. boom length Built 1957-1973 Rotator only $175 Control only $75      Package       $250

Ham II  (H-2)    Heavy Duty Vert. Load: 800 lbs. 98 ball bearings Potentiometer feedback 8 wire hookup 24' Max. antenna boom length  Built from 1974-1977    Rotator only $225             Control only $100      Package       $300

Controls by C.A.T.S.

Note : these are large pictures and take awhile to load on slow connections

Control #1  $ 299	Basic function digital-readout model for our RD-1800 and RL-1100. (DC motors)
digital readout,    one memory	DPU-1100 basic controller
Control #2   $ 449 DPU-1800-D	DELUXE all digital model for RD-1800 or RL-1100 with variable PreSet, RS-232, programmable end of rotation, etc.          Note : speed control not yet available. Compatible with most popular logging programs and satellite/moon-tracking programs too !!
	DPU-1800-d

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++  

Want digital readout and RS-232 at an affordable price ?   Now available for Yaesu rotators also !!                     Custom-built for your Yaesu G-800, G-1000, G-2700, or G-2800  !!

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Control #3   $269.00 DPU-750	Basic digital-readout model for CDE/HyGain Ham-M,2,3,4,5 & T2X. (AC motors) also works with CD-44 & CD-45
digital readout, one memory

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Control #4:   $449.00 DPU-750-Dxxx	Deluxe all digital model for CDE/HyGain Ham-2,3,4,5 & T2X. (AC motors) with variable preset, RS-232 interface, programmable end of rotation, etc. Compatible with most popular logging programs and satellite/moon-tracking programs too !!
Now available     Hundreds of $$ less than the DCU-1	Deluxe control for CDE and Hy-Gain HAM rotators

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

RL-1100 by C.A.T.S.

$ 599.00 rotator & basic digital control* 

***************** Mounts vertically or horizontally. **************

Usable as either an azimuth OR elevation rotator !!

Unit has a 2.00" hole through the middle for easier tower work; no need to remove rotator when servicing antennas. Mounts inside most standard towers; none of that "hanging out one side" like some other brands. 

Stainless steel 2" I.D. output shaft, fits crossbooms the others won't !!

Optional sleeves available for antenna booms or masts less than 2" O.D.

Precision 10-turn potentiometer for SUPERIOR accuracy

Turning torque approx. 800 in./lbs., brake torque approx. 4000 in./lbs.

Standard 3.00" mounting hole pattern 

Safe and quiet 24 VDC operation, can be lowered for slower speeds

     ** Rotator can also be purchased separately for operation with your favorite controller or computer interface board...........$ 399.00    (may require optional DC adaptor) 

* Deluxe controller with RS-232 control and variable Pre-set function is available with package at additional cost.

SPECIALTY ITEMS
Exclusively from C.A.T.S.

Order online @ our new parts site !   Click

BRAK-D-LAY  (BD) The popular "Brak-D-Lay" provides a 5-second delay time for brake engagement on the CDE/Hygain series of HAM rotors. This 1.75" square board is designed especially small for the old Ham "M" control box and actually fits inside, as well as easily fitting into modern HAM-IV controls.  Complete installation instructions are included for mounting the unit in the Ham "M", Ham II, Ham III, Ham IV, and T2X rotators. Each unit comes with a 90 day guarantee. The unit uses standard parts and repair service is available.

SUPER WEDGE  (SW)
Brake problems? Antenna turning when you don't want it to? The super wedge is an improved direct replacement wedge for Ham III and Ham IV rotators. Presently holding antennas with boom lengths up to 40 feet, the Super Wedge is guaranteed unbreakable. Also fits the Ham "M" and the Ham II with housing change.

QUICK-CONNECT  (QC) Finally, a weather-resistant locking connector to replace the infamous terminal strip in all CDE/Hygain rotators. The "Quick-Connect" will be the last plug you ever buy for your rotor. The chassis portion mounts to the rotator with the included mounting plate. Gold plated pins and heat-shrink tubing guarantee low resistance and weather protection. A starter kit is available which includes all hardware and instructions for one rotor and cable assembly, or you can purchase individual pieces of hardware for multiple rotator systems. Can only be used with rotators mounted in tower on shelf/plate (Mast-mt. units require optional QCMASP adaptor.)

Prices are listed @ our new parts site !   Click

We accept Mastercard, Visa, and Discover

Click to view our list of
rotor model archives!

C.A.T.S.
7368 S.R. 105
Pemberville, OH 43450

1-419-353-2287
Fax: 1-419-354-7746 

or email (preferred) to CATS@coastalwave.net

Open 10am to 5pm Mon - Fri
Closed Weekends & Holidays

Order online @ our new parts site !   Click

Back to main page